The E4980a Datasheet is a critical document for anyone working with or considering the Keysight E4980A LCR Meter. This comprehensive document provides all the essential technical specifications, performance characteristics, and operational details of the instrument. Understanding the E4980a Datasheet is key to effectively utilizing the E4980A for accurate and reliable impedance measurements.
Understanding the E4980a Datasheet: More Than Just Numbers
The E4980a Datasheet is the definitive source of information for the Keysight E4980A LCR Meter. It acts as a blueprint, detailing every aspect of the instrument's capabilities. From its basic operational frequencies to its most advanced measurement features, the datasheet provides the foundational knowledge needed to select, set up, and operate the E4980A. This document is invaluable for engineers, technicians, and researchers who rely on precise impedance measurements for various applications, including component characterization, material analysis, and quality control.
Here's a glimpse into what you'll find within the E4980a Datasheet:
- Measurement frequencies and ranges
- Accuracy specifications
- Test signal levels
- Measurement parameters (e.g., L, C, R, Z, Q, D, θ, ESR)
- Special measurement features (e.g., auto-ranging, auto-level)
- Interface options (e.g., USB, LAN, GPIB)
- Power and environmental requirements
- Physical dimensions and weight
The E4980a Datasheet is used in several crucial ways. Firstly, it aids in selecting the right instrument for a specific application. By comparing the specifications listed in the datasheet against the requirements of a particular measurement task, users can confidently determine if the E4980A is suitable. Secondly, it serves as a reference during instrument setup and operation, ensuring that users understand the capabilities and limitations of the device. Finally, it's an essential resource for troubleshooting and understanding test results. The importance of thoroughly reviewing and understanding the E4980a Datasheet cannot be overstated, as it directly impacts the validity and reliability of your measurement data.
Consider the following table, often found within an E4980a Datasheet, which highlights key performance metrics:
| Parameter | Typical Accuracy | Frequency Range |
|---|---|---|
| Capacitance (C) | 0.1% | 20 Hz to 100 kHz |
| Inductance (L) | 0.1% | 20 Hz to 100 kHz |
| Resistance (R) | 0.2% | 20 Hz to 100 kHz |
To fully leverage the capabilities of your Keysight E4980A LCR Meter, delve into the official E4980a Datasheet. This document is your ultimate resource for understanding its specifications, features, and how to achieve optimal measurement performance.